This page lists all 3 Neumi speakers ranked on this site across powered speakers and passive speakers. Each model is shown in the category where it competes, with its current rank and the size of that ranking.
Use the category position rather than the brand name alone: speakers from the same manufacturer can perform very differently by size, price and product family.
Medium Size Powered Bookshelf Speakers
Ranked #35 of 36 in Medium Size Powered Bookshelf Speakers - Neumi BS5P: $150/pair Amazon
Pros: Exceptionally broad connectivity for the price: Bluetooth, optical, coaxial and RCA inputs, remote control and 75W total amplification. The 5-inch fiberglass woofer/1-inch silk-dome platform has generally useful directivity outside port resonances and therefore responds well to corrective EQ. Compact dimensions and ample nearfield volume make it practical for a desk or small room.
Cons: The original firmware Erin reviewed produces a pronounced V-curve—excess midbass and treble with recessed dialogue/midrange—and is a fidelity step backward from the passive BS5. Nearfield treble above 8kHz rises as much as 4dB relative to farfield, distortion is already substantial at 86dB, and compression becomes severe above 96dB. Port resonances further contaminate the response. Erin later measured improved firmware, but buyers must confirm revision. Passive sensitivity and impedance are not applicable.
Full Neumi BS5P review and specifications →
| Bass Extension | Erin's response shows usable midbass but limited deep-bass headroom |
|---|---|
| Drivers | 1" silk-dome tweeter; 5" fiberglass woofer |
| Inputs | Bluetooth, optical, coaxial and RCA |
| Power | 75W total |
| Sensitivity | Not applicable (active DSP loudspeaker) |
As an eBay Partner, we may be compensated if you make a purchase.
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Medium Size Bookshelf Speakers
Ranked #11 of 34 in Medium Size Bookshelf Speakers - Neumi BS5: $110/pair Amazon
Pros: Exceptional budget value: Erin measured approximately +/-1.5dB on-axis linearity through most of the mid/treble, 84dB/2.83V/1m sensitivity and a manageable 4.6-ohm minimum. The 5-inch fiberglass woofer and 1-inch silk dome provide good horizontal directivity for the price; a mild upper-bass rise adds punch, and ordinary modern AVRs can generally drive the mostly six-ohm load at sensible levels.
Cons: Erin measured F3 at 64Hz, so kick-drum punch should not be mistaken for deep-bass extension. Output around 90dB began to reveal distortion and compression, limiting farfield/high-volume use. A narrow dip near 800Hz, port/cabinet resonances and imperfect crossover directivity remain visible; the tweeter itself is approximately four ohms even though the system is sold as nominal six ohms. A subwoofer is strongly preferred.
Full Neumi BS5 review and specifications →
| Bass Extension (-3dB) | 64Hz (measured, Erin's Audio Corner) |
|---|---|
| Drivers | 1" silk-dome tweeter; 5" fiberglass woofer |
| Impedance | 4.6 ohms minimum; approximately 6 ohms nominal (measured, Erin's Audio Corner) |
| Sensitivity | Approximately 84dB/2.83V/1m (measured, Erin's Audio Corner) |
| Woofer Cabinet | ported, front |
As an eBay Partner, we may be compensated if you make a purchase.
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Ranked #15 of 34 in Medium Size Bookshelf Speakers - Neumi Silk 4: $199.99 Amazon
Pros: A 4” midwoofer paired with a 1” dome tweeter and waveguide, with a second-order crossover, achieving an impressively high preference score of 4.4 for the price. Distortion stays below 1% up to about 120Hz and below 3% above roughly 50-60Hz at 86dB. High-frequency compression is surprisingly good - better than some speakers costing 2-3x as much - and at 96dB/1m for a pair, output still reaches about 93dB at 3 meters, plenty loud for most listeners. F3 of 83Hz and F10 of 55Hz with in-room extension to about 70Hz. Takes very well to EQ correction, and the reviewer provides a specific fix (a notch around 650Hz, Q of about 6) that cleans up its main resonance.
Cons: Very low sensitivity (measured 82.6dB), meaning it isn’t suited for large rooms, far-field listening, or high volume. A resonance around 650Hz (likely port- or cabinet-related) creates an audible 1-2dB midrange thickness/boxiness on certain tracks, tied to a probable baffle-step compensation shortfall - about 1dB more energy in the midrange from the factory would likely have resolved it. Multitone distortion becomes audible around the same 600Hz-1kHz region at 96dB. Horizontal radiation narrows to about ±50° with the waveguide, on the narrower side of what the reviewer prefers. A diffraction-related dip around 5kHz at 5° below the tweeter axis creates a small hole in the response if placed on a desk below ear level. Nominal impedance of about 6 ohms with a low sensitivity means it benefits from a subwoofer pairing (the reviewer suggests an 80Hz crossover) for a complete small-room or surround setup.
Full Neumi Silk 4 review and specifications →
| Bass Extension (-10dB) | 55Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 83Hz (measured, Erin's Audio Corner) |
| Dimensions | 8.9"H x 5.5"W x 8.2"D (226.1 x 139.7 x 208.3 mm) |
| Drivers | 4" treated paper cone, rubber surround, cast aluminum basket, vented pole woofer, 1" silk dome, dispersion-optimized waveguide, neodymium magnet tweeter |
| Impedance | 6 ohms nominal, 5.7 ohms minimum (measured, Erin's Audio Corner) |
| Sensitivity | 82.6dB (measured, Erin's Audio Corner) |
| Weight | 6.2 lbs / 2.8 kg each |
| Woofer Cabinet | ported, rear |
As an eBay Partner, we may be compensated if you make a purchase.
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons