Short answer: the Radiant Acoustics Clarity 6.2 on measured sound quality, the Triangle Borea BR03 on price. The Radiant Acoustics Clarity 6.2 ranks #27 of 130 bookshelf speakers at $4500. The Triangle Borea BR03 ranks #109 at $399, $4101 cheaper.
What the Triangle Borea BR03 offers: Bass output is genuinely decent for the price - measured extension reaches F3 57Hz/F10 42Hz, which the reviewer had no real complaints about. Dual front-firing ports and a well-stuffed, well-braced cabinet. Solid build quality overall. Watch for: A noticeable mid-range suckout, most pronounced in the upper mid-range/lower treble, that the reviewer attributes to cabinet resonances and driver breakup rather than a deliberate voicing choice - it makes vocals and instruments sound recessed and thin rather than warm. Sibilance in the 4-8kHz region shows up on every track the reviewer tried. Measured minimum impedance dips to about 4.2 ohms (with an even lower EPDR), despite the speaker and its own rear panel being labeled 8 ohms - worth knowing if you’re planning to drive these with a receiver/AVR that assumes an 8-ohm nominal load. The reviewer is upfront that this speaker has a devoted following among other reviewers, but says he specifically doesn’t hear what they hear and wants people who own it to trust their own ears rather than assume something’s wrong with their hearing if they don’t love it either.
What the Radiant Acoustics Clarity 6.2 offers: Custom AMT (Air Motion Transformer) tweeter paired with a 6.5” Purifi Eikona midrange and dual Purifi passive radiators in a passive-radiator enclosure, crossed over at 2.4kHz. Rigid cabinet construction (21mm MDF with a 15mm aluminum front baffle, extensive internal bracing) helps keep resonance in check. A deliberately rising on-axis response paired with narrowing directivity above about 2kHz yields a genuinely linear, non-fatiguing in-room sound rather than the “fake detail” of speakers with a straight treble boost. Excellent pair matching between units (within about 1dB), contributing to precise, well-focused imaging that clearly separated fine details in test tracks. In-room bass extension reaches a solid 40Hz with real kick-drum authority, not just sub-bass rumble. Class-leading dynamic range and compression performance - among the best the reviewer has measured at this price point. Watch for: Needs a fairly specific setup to sound its best: about 15-20° of toe-out (per the manufacturer’s own recommendation) and roughly 2 feet from the rear wall; pointed straight on-axis, the treble reads as noticeably elevated. Low impedance (2.1-ohm minimum, about 1-ohm minimum EPDR) demands an amplifier genuinely comfortable with 4-ohm-and-below loads. Soundstage width narrows above about 5kHz, even though the AMT tweeter itself is capable of wider dispersion. An unexplained resonance appears in harmonic distortion measurements on both units tested (though not on the reviewer’s reference speaker) - possibly a basket resonance, and not something the reviewer could hear. A minor bump around 500Hz in the estimated in-room response could add a touch of boxiness for some listeners, though the reviewer didn’t personally notice it. F3 of 55Hz and F10 of 32Hz mean a subwoofer is still needed for home-theater rumble or bass-heavy genres like rap.
Buy the Triangle Borea BR03 if the price is the priority over sound quality, or the Radiant Acoustics Clarity 6.2 if sound quality is the priority over the price.
Skip the Triangle Borea BR03 if sound quality matters to you. It ranks near the bottom of the 130 bookshelf speakers.
Looking for alternatives? See the complete Passive Home rankings.
Specifications Side By Side
| Triangle Borea BR03 | Radiant Acoustics Clarity 6.2 | |
|---|---|---|
| Price | $399.00 per pair | $4500 per pair |
| Ranked | #109 of 130 in Large Size Bookshelf Speakers | #27 of 130 in Large Size Bookshelf Speakers |
| Drivers | 6.5" natural cellulose midwoofer, 1" (25mm) EFS silk dome tweeter | 6.5" PURIFI USHINDI woofer, Custom AMT (Air Motion Transformer) tweeter |
| Crossover Frequency | 3600Hz | - |
| Dimensions | 14.96"H x 8.11"W x 12.36"D | 14.3"H x 8.7"W x 10.5"D (363.2 x 221 x 266.7 mm) |
| Weight | 13.2 lbs (6 kg) each | 23.8 lbs (10.8 kg) each |
| Impedance | 8 ohms nominal (manufacturer spec), 4.2 ohms minimum (measured, Erin's Audio Corner) | 4 ohms nominal (2.1 ohms minimum above 80Hz, measured, Erin's Audio Corner) |
| Sensitivity | 87.5dB (measured at 2.83V/1m, Erin's Audio Corner) | 84.3dB (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 57Hz (measured, Erin's Audio Corner) | 55Hz (measured, Erin's Audio Corner) |
| Bass Extension (-10dB) | 42Hz (measured, Erin's Audio Corner) | 32Hz (measured, Erin's Audio Corner) |
| Recommended Power | 100W | - |
| Woofer Cabinet | ported, dual front ports | passive radiator |
| Spinorama Preference Score | 3.12 | 5.13 |
| Spinorama Preference Score with Perfect Sub | 5.47 | 6.90 |
Related Speaker Comparisons
More worthwhile head-to-heads for Radiant Acoustics Clarity 6.2:
- Radiant Acoustics Clarity 6.2 vs Perlisten S4b
- KEF Reference 1 Meta vs Radiant Acoustics Clarity 6.2
- Radiant Acoustics Clarity 6.2 vs GR-Research NX-Studio
- AsciLab C6B vs Radiant Acoustics Clarity 6.2
- Audio First Cadentia 3 vs Radiant Acoustics Clarity 6.2
Prices on this page were last checked September 16, 2026 at 12:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Triangle Borea BR03: $399.00 per pair Amazon eBay
Pros: Bass output is genuinely decent for the price - measured extension reaches F3 57Hz/F10 42Hz, which the reviewer had no real complaints about. Dual front-firing ports and a well-stuffed, well-braced cabinet. Solid build quality overall. Measured bass extension of 57Hz (-3dB), with a measured sensitivity of 87.5dB.
Cons: A noticeable mid-range suckout, most pronounced in the upper mid-range/lower treble, that the reviewer attributes to cabinet resonances and driver breakup rather than a deliberate voicing choice - it makes vocals and instruments sound recessed and thin rather than warm. Sibilance in the 4-8kHz region shows up on every track the reviewer tried. Measured minimum impedance dips to about 4.2 ohms (with an even lower EPDR), despite the speaker and its own rear panel being labeled 8 ohms - worth knowing if you’re planning to drive these with a receiver/AVR that assumes an 8-ohm nominal load. The reviewer is upfront that this speaker has a devoted following among other reviewers, but says he specifically doesn’t hear what they hear and wants people who own it to trust their own ears rather than assume something’s wrong with their hearing if they don’t love it either.
Full Triangle Borea BR03 review and specifications →
| Bass Extension (-10dB) | 42Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 57Hz (measured, Erin's Audio Corner) |
| Crossover Frequency | 3600Hz |
| Dimensions | 14.96"H x 8.11"W x 12.36"D |
| Drivers | 6.5" natural cellulose midwoofer, 1" (25mm) EFS silk dome tweeter |
| Impedance | 8 ohms nominal (manufacturer spec), 4.2 ohms minimum (measured, Erin's Audio Corner) |
| Recommended Power | 100W |
| Sensitivity | 87.5dB (measured at 2.83V/1m, Erin's Audio Corner) |
| Spinorama Preference Score | 3.12 |
| Spinorama Preference Score with Perfect Sub | 5.47 |
| Weight | 13.2 lbs (6 kg) each |
| Woofer Cabinet | ported, dual front ports |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Triangle Borea BR03 vs B&W 805S
- Triangle Borea BR03 vs Wharfedale Diamond 9.1
- Triangle Borea BR03 vs Klipsch RP-600M
- Triangle Borea BR03 vs Sonus Faber Lumina II Amator
- Triangle Borea BR03 vs Aperion Audio Verus V8B
- Triangle Borea BR03 vs KEF Q350
- Triangle Borea BR03 vs Sonus Faber Sonetto II G2
- Triangle Borea BR03 vs Emotiva Airmotiv B2+
- See all 51 comparisons
Radiant Acoustics Clarity 6.2: $4500 per pair Radiantacoustics eBay
Pros: Custom AMT (Air Motion Transformer) tweeter paired with a 6.5” Purifi Eikona midrange and dual Purifi passive radiators in a passive-radiator enclosure, crossed over at 2.4kHz. Rigid cabinet construction (21mm MDF with a 15mm aluminum front baffle, extensive internal bracing) helps keep resonance in check. A deliberately rising on-axis response paired with narrowing directivity above about 2kHz yields a genuinely linear, non-fatiguing in-room sound rather than the “fake detail” of speakers with a straight treble boost. Excellent pair matching between units (within about 1dB), contributing to precise, well-focused imaging that clearly separated fine details in test tracks. In-room bass extension reaches a solid 40Hz with real kick-drum authority, not just sub-bass rumble. Class-leading dynamic range and compression performance - among the best the reviewer has measured at this price point. Measured bass extension of 55Hz (-3dB), with a measured sensitivity of 84.3dB.
Cons: Needs a fairly specific setup to sound its best: about 15-20° of toe-out (per the manufacturer’s own recommendation) and roughly 2 feet from the rear wall; pointed straight on-axis, the treble reads as noticeably elevated. Low impedance (2.1-ohm minimum, about 1-ohm minimum EPDR) demands an amplifier genuinely comfortable with 4-ohm-and-below loads. Soundstage width narrows above about 5kHz, even though the AMT tweeter itself is capable of wider dispersion. An unexplained resonance appears in harmonic distortion measurements on both units tested (though not on the reviewer’s reference speaker) - possibly a basket resonance, and not something the reviewer could hear. A minor bump around 500Hz in the estimated in-room response could add a touch of boxiness for some listeners, though the reviewer didn’t personally notice it. F3 of 55Hz and F10 of 32Hz mean a subwoofer is still needed for home-theater rumble or bass-heavy genres like rap.
Full Radiant Acoustics Clarity 6.2 review and specifications →
| Bass Extension (-10dB) | 32Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 55Hz (measured, Erin's Audio Corner) |
| Dimensions | 14.3"H x 8.7"W x 10.5"D (363.2 x 221 x 266.7 mm) |
| Drivers | 6.5" PURIFI USHINDI woofer, Custom AMT (Air Motion Transformer) tweeter |
| Impedance | 4 ohms nominal (2.1 ohms minimum above 80Hz, measured, Erin's Audio Corner) |
| Sensitivity | 84.3dB (measured, Erin's Audio Corner) |
| Spinorama Preference Score | 5.13 |
| Spinorama Preference Score with Perfect Sub | 6.90 |
| Weight | 23.8 lbs (10.8 kg) each |
| Woofer Cabinet | passive radiator |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Radiant Acoustics Clarity 6.2 vs MoFi SourcePoint 10
- Radiant Acoustics Clarity 6.2 vs Dynaudio Heritage Special
- Radiant Acoustics Clarity 6.2 vs Wharfedale Super Linton
- Radiant Acoustics Clarity 6.2 vs Ascend Acoustics CMT-340 SE2
- Radiant Acoustics Clarity 6.2 vs Wharfedale Linton 85
- Radiant Acoustics Clarity 6.2 vs Arendal 1528 Monitor 8
- Radiant Acoustics Clarity 6.2 vs Ascend Acoustics Sierra-LX
- Radiant Acoustics Clarity 6.2 vs Revel M126Be
- See all 45 comparisons