Short answer: the Radiant Acoustics Clarity 6.2 on measured sound quality, the Sonus Faber Sonetto II G2 on price. The Radiant Acoustics Clarity 6.2 ranks #27 of 130 bookshelf speakers at $4500. The Sonus Faber Sonetto II G2 ranks #103 at $3500, $1000 cheaper.
What the Sonus Faber Sonetto II G2 offers: Two-way design with a 1.125” damped Apex Dome silk tweeter and 6.5” cone woofer, using a base of concrete, aluminum, and steel with under-cabinet venting. Notably more neutral than Sonus Faber’s own Lumina 2, which runs 2-5dB hotter in the treble. Horizontal directivity narrows at a fairly constant, well-behaved rate rather than narrowing-then-widening-then-narrowing like some rivals (including the Lumina 2), meaning sidewall reflections match the direct sound well enough that the reviewer doesn’t recommend sidewall absorption for this speaker. The tweeter-to-woofer crossover handoff around 3kHz looks clean, suggesting a higher-order crossover than typical for the size/price class. Good dynamic range - the low end loses only about 2dB from 76dB to 96dB, otherwise holding up well. Not a difficult amplifier load (about 4.2 ohms minimum impedance). Bass extension reaches a genuine 50Hz in-room, fuller than the Lumina 2. Watch for: Sounds notably bright pointed directly on-axis; toeing the speaker out about 30° reduces treble energy and sibilance meaningfully. A resonance around 700Hz gives vocals a slightly nasal, hollow quality. A dip in the upper midrange (roughly 1-2kHz) reduces perceived detail and attack, while the elevated treble can read as “analytical” or “detailed” to some listeners despite being a coloration rather than true resolution. Needs more clearance from the rear wall than some rivals - about 1.5-2 feet in an ideal room, more or less depending on your specific room modes - or the 80-120Hz region can become boomy. Vertical listening window is limited to about ±10-15° from the tweeter axis. Some unexplained directivity irregularities appear around 1.2kHz and 1.6kHz, possibly port-related, along with a longer decay in the 800Hz-1600Hz range in burst-decay measurements. Multitone distortion approaches the reviewer’s 3% threshold through the midrange, though likely not obviously audible without direct A/B comparison. A resonance in the cabinet appears around 400Hz in impedance measurements.
What the Radiant Acoustics Clarity 6.2 offers: Custom AMT (Air Motion Transformer) tweeter paired with a 6.5” Purifi Eikona midrange and dual Purifi passive radiators in a passive-radiator enclosure, crossed over at 2.4kHz. Rigid cabinet construction (21mm MDF with a 15mm aluminum front baffle, extensive internal bracing) helps keep resonance in check. A deliberately rising on-axis response paired with narrowing directivity above about 2kHz yields a genuinely linear, non-fatiguing in-room sound rather than the “fake detail” of speakers with a straight treble boost. Excellent pair matching between units (within about 1dB), contributing to precise, well-focused imaging that clearly separated fine details in test tracks. In-room bass extension reaches a solid 40Hz with real kick-drum authority, not just sub-bass rumble. Class-leading dynamic range and compression performance - among the best the reviewer has measured at this price point. Watch for: Needs a fairly specific setup to sound its best: about 15-20° of toe-out (per the manufacturer’s own recommendation) and roughly 2 feet from the rear wall; pointed straight on-axis, the treble reads as noticeably elevated. Low impedance (2.1-ohm minimum, about 1-ohm minimum EPDR) demands an amplifier genuinely comfortable with 4-ohm-and-below loads. Soundstage width narrows above about 5kHz, even though the AMT tweeter itself is capable of wider dispersion. An unexplained resonance appears in harmonic distortion measurements on both units tested (though not on the reviewer’s reference speaker) - possibly a basket resonance, and not something the reviewer could hear. A minor bump around 500Hz in the estimated in-room response could add a touch of boxiness for some listeners, though the reviewer didn’t personally notice it. F3 of 55Hz and F10 of 32Hz mean a subwoofer is still needed for home-theater rumble or bass-heavy genres like rap.
Buy the Sonus Faber Sonetto II G2 when the price outweighs sound quality for you, and the Radiant Acoustics Clarity 6.2 when sound quality outweighs the price instead.
If sound quality matters at all to you, skip the Sonus Faber Sonetto II G2. It ranks near the bottom of the 130 bookshelf speakers, so look higher up the list instead.
Want more options? Browse the full Passive Home rankings.
Specifications Side By Side
| Sonus Faber Sonetto II G2 | Radiant Acoustics Clarity 6.2 | |
|---|---|---|
| Price | $3500 per pair | $4500 per pair |
| Ranked | #103 of 130 in Large Size Bookshelf Speakers | #27 of 130 in Large Size Bookshelf Speakers |
| Bass Extension (-10dB) | 38Hz (measured, Erin's Audio Corner) | 32Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 62Hz (measured, Erin's Audio Corner) | 55Hz (measured, Erin's Audio Corner) |
| Impedance | 4 ohms nominal (4.2 ohms minimum, measured by Erin's Audio Corner) | 4 ohms nominal (2.1 ohms minimum above 80Hz, measured, Erin's Audio Corner) |
| Sensitivity | 87dB (measured, Erin's Audio Corner) | 84.3dB (measured, Erin's Audio Corner) |
| Drivers | 1x 6.5" mid-woofer (paper cone), 1x 1.1" (28mm) DAD soft dome tweeter | 6.5" PURIFI USHINDI woofer, Custom AMT (Air Motion Transformer) tweeter |
| Weight | 38.4 lbs (17.4 kg) | 23.8 lbs (10.8 kg) each |
| Dimensions | 16.3"H x 8.9"W x 14"D (414.3 x 227.0 x 355.6 mm) | 14.3"H x 8.7"W x 10.5"D (363.2 x 221 x 266.7 mm) |
| Woofer Cabinet | ported, front | passive radiator |
| Spinorama Preference Score | 3.34 | 5.13 |
| Spinorama Preference Score with Perfect Sub | 5.62 | 6.90 |
Related Speaker Comparisons
More worthwhile head-to-heads for Radiant Acoustics Clarity 6.2:
- Radiant Acoustics Clarity 6.2 vs Perlisten S4b
- KEF Reference 1 Meta vs Radiant Acoustics Clarity 6.2
- Radiant Acoustics Clarity 6.2 vs GR-Research NX-Studio
- AsciLab C6B vs Radiant Acoustics Clarity 6.2
- Audio First Cadentia 3 vs Radiant Acoustics Clarity 6.2
Prices on this page were last checked September 16, 2026 at 12:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Sonus Faber Sonetto II G2: $3500 per pair Crutchfield eBay
Pros: Two-way design with a 1.125” damped Apex Dome silk tweeter and 6.5” cone woofer, using a base of concrete, aluminum, and steel with under-cabinet venting. Notably more neutral than Sonus Faber’s own Lumina 2, which runs 2-5dB hotter in the treble. Horizontal directivity narrows at a fairly constant, well-behaved rate rather than narrowing-then-widening-then-narrowing like some rivals (including the Lumina 2), meaning sidewall reflections match the direct sound well enough that the reviewer doesn’t recommend sidewall absorption for this speaker. The tweeter-to-woofer crossover handoff around 3kHz looks clean, suggesting a higher-order crossover than typical for the size/price class. Good dynamic range - the low end loses only about 2dB from 76dB to 96dB, otherwise holding up well. Not a difficult amplifier load (about 4.2 ohms minimum impedance). Bass extension reaches a genuine 50Hz in-room, fuller than the Lumina 2. Measured bass extension of 62Hz (-3dB), with a measured sensitivity of 87dB.
Cons: Sounds notably bright pointed directly on-axis; toeing the speaker out about 30° reduces treble energy and sibilance meaningfully. A resonance around 700Hz gives vocals a slightly nasal, hollow quality. A dip in the upper midrange (roughly 1-2kHz) reduces perceived detail and attack, while the elevated treble can read as “analytical” or “detailed” to some listeners despite being a coloration rather than true resolution. Needs more clearance from the rear wall than some rivals - about 1.5-2 feet in an ideal room, more or less depending on your specific room modes - or the 80-120Hz region can become boomy. Vertical listening window is limited to about ±10-15° from the tweeter axis. Some unexplained directivity irregularities appear around 1.2kHz and 1.6kHz, possibly port-related, along with a longer decay in the 800Hz-1600Hz range in burst-decay measurements. Multitone distortion approaches the reviewer’s 3% threshold through the midrange, though likely not obviously audible without direct A/B comparison. A resonance in the cabinet appears around 400Hz in impedance measurements.
Full Sonus Faber Sonetto II G2 review and specifications →
| Bass Extension (-10dB) | 38Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 62Hz (measured, Erin's Audio Corner) |
| Dimensions | 16.3"H x 8.9"W x 14"D (414.3 x 227.0 x 355.6 mm) |
| Drivers | 1x 6.5" mid-woofer (paper cone), 1x 1.1" (28mm) DAD soft dome tweeter |
| Impedance | 4 ohms nominal (4.2 ohms minimum, measured by Erin's Audio Corner) |
| Sensitivity | 87dB (measured, Erin's Audio Corner) |
| Spinorama Preference Score | 3.34 |
| Spinorama Preference Score with Perfect Sub | 5.62 |
| Weight | 38.4 lbs (17.4 kg) |
| Woofer Cabinet | ported, front |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Sonus Faber Sonetto II G2 vs Audio Craftsmen Victoria
- Sonus Faber Sonetto II G2 vs Pylon Jasper Monitor 18
- Sonus Faber Sonetto II G2 vs KEF Q350
- Sonus Faber Sonetto II G2 vs Emotiva Airmotiv B2+
- Sonus Faber Sonetto II G2 vs Sonus Faber Lumina II Amator
- Sonus Faber Sonetto II G2 vs JBL XPL-90
- Sonus Faber Sonetto II G2 vs Polk Reserve R100
- Sonus Faber Sonetto II G2 vs Klipsch RP-600M
- See all 59 comparisons
Radiant Acoustics Clarity 6.2: $4500 per pair Radiantacoustics eBay
Pros: Custom AMT (Air Motion Transformer) tweeter paired with a 6.5” Purifi Eikona midrange and dual Purifi passive radiators in a passive-radiator enclosure, crossed over at 2.4kHz. Rigid cabinet construction (21mm MDF with a 15mm aluminum front baffle, extensive internal bracing) helps keep resonance in check. A deliberately rising on-axis response paired with narrowing directivity above about 2kHz yields a genuinely linear, non-fatiguing in-room sound rather than the “fake detail” of speakers with a straight treble boost. Excellent pair matching between units (within about 1dB), contributing to precise, well-focused imaging that clearly separated fine details in test tracks. In-room bass extension reaches a solid 40Hz with real kick-drum authority, not just sub-bass rumble. Class-leading dynamic range and compression performance - among the best the reviewer has measured at this price point. Measured bass extension of 55Hz (-3dB), with a measured sensitivity of 84.3dB.
Cons: Needs a fairly specific setup to sound its best: about 15-20° of toe-out (per the manufacturer’s own recommendation) and roughly 2 feet from the rear wall; pointed straight on-axis, the treble reads as noticeably elevated. Low impedance (2.1-ohm minimum, about 1-ohm minimum EPDR) demands an amplifier genuinely comfortable with 4-ohm-and-below loads. Soundstage width narrows above about 5kHz, even though the AMT tweeter itself is capable of wider dispersion. An unexplained resonance appears in harmonic distortion measurements on both units tested (though not on the reviewer’s reference speaker) - possibly a basket resonance, and not something the reviewer could hear. A minor bump around 500Hz in the estimated in-room response could add a touch of boxiness for some listeners, though the reviewer didn’t personally notice it. F3 of 55Hz and F10 of 32Hz mean a subwoofer is still needed for home-theater rumble or bass-heavy genres like rap.
Full Radiant Acoustics Clarity 6.2 review and specifications →
| Bass Extension (-10dB) | 32Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 55Hz (measured, Erin's Audio Corner) |
| Dimensions | 14.3"H x 8.7"W x 10.5"D (363.2 x 221 x 266.7 mm) |
| Drivers | 6.5" PURIFI USHINDI woofer, Custom AMT (Air Motion Transformer) tweeter |
| Impedance | 4 ohms nominal (2.1 ohms minimum above 80Hz, measured, Erin's Audio Corner) |
| Sensitivity | 84.3dB (measured, Erin's Audio Corner) |
| Spinorama Preference Score | 5.13 |
| Spinorama Preference Score with Perfect Sub | 6.90 |
| Weight | 23.8 lbs (10.8 kg) each |
| Woofer Cabinet | passive radiator |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Radiant Acoustics Clarity 6.2 vs MoFi SourcePoint 10
- Radiant Acoustics Clarity 6.2 vs Dynaudio Heritage Special
- Radiant Acoustics Clarity 6.2 vs Wharfedale Super Linton
- Radiant Acoustics Clarity 6.2 vs Ascend Acoustics CMT-340 SE2
- Radiant Acoustics Clarity 6.2 vs Wharfedale Linton 85
- Radiant Acoustics Clarity 6.2 vs Arendal 1528 Monitor 8
- Radiant Acoustics Clarity 6.2 vs Ascend Acoustics Sierra-LX
- Radiant Acoustics Clarity 6.2 vs Revel M126Be
- See all 45 comparisons