Short answer: the Radiant Acoustics Clarity 6.2 if sound quality matters most, the Ascend Acoustics Sierra-2EX V2 if price matters most. The Radiant Acoustics Clarity 6.2 ranks #27 of 130 bookshelf speakers at $4500. The Ascend Acoustics Sierra-2EX V2 ranks #38 at $1748, $2752 cheaper.
What the Ascend Acoustics Sierra-2EX V2 offers: A RAAL true ribbon tweeter is paired with a custom SEAS Excel Curv woofer, with the crossover optimized against Klippel NFS measurement data. Listening window smoothness measures 0.45, a moderate but usable figure for a compact standmount. Pairs are hand matched within +/-1.5dB and shipped with their own individual frequency response printout, backed by a 7 year parts and labor warranty from direct USA assembly in Orange County, California. Watch for: On axis deviation (measured average absolute deviation 0.454) is the roughest of any speaker in this batch, meaning a listener sitting dead center may notice more on axis unevenness than the smoother AsciLab or Ascend tower models nearby. Bass extension is modest for the price class at a measured 51.3Hz at -6dB. Ascend sells direct only, with no dealer network or third party retailers for an in person audition.
What the Radiant Acoustics Clarity 6.2 offers: Custom AMT (Air Motion Transformer) tweeter paired with a 6.5” Purifi Eikona midrange and dual Purifi passive radiators in a passive-radiator enclosure, crossed over at 2.4kHz. Rigid cabinet construction (21mm MDF with a 15mm aluminum front baffle, extensive internal bracing) helps keep resonance in check. A deliberately rising on-axis response paired with narrowing directivity above about 2kHz yields a genuinely linear, non-fatiguing in-room sound rather than the “fake detail” of speakers with a straight treble boost. Excellent pair matching between units (within about 1dB), contributing to precise, well-focused imaging that clearly separated fine details in test tracks. In-room bass extension reaches a solid 40Hz with real kick-drum authority, not just sub-bass rumble. Class-leading dynamic range and compression performance - among the best the reviewer has measured at this price point. Watch for: Needs a fairly specific setup to sound its best: about 15-20° of toe-out (per the manufacturer’s own recommendation) and roughly 2 feet from the rear wall; pointed straight on-axis, the treble reads as noticeably elevated. Low impedance (2.1-ohm minimum, about 1-ohm minimum EPDR) demands an amplifier genuinely comfortable with 4-ohm-and-below loads. Soundstage width narrows above about 5kHz, even though the AMT tweeter itself is capable of wider dispersion. An unexplained resonance appears in harmonic distortion measurements on both units tested (though not on the reviewer’s reference speaker) - possibly a basket resonance, and not something the reviewer could hear. A minor bump around 500Hz in the estimated in-room response could add a touch of boxiness for some listeners, though the reviewer didn’t personally notice it. F3 of 55Hz and F10 of 32Hz mean a subwoofer is still needed for home-theater rumble or bass-heavy genres like rap.
Buy the Ascend Acoustics Sierra-2EX V2 if the price matters more than sound quality. Buy the Radiant Acoustics Clarity 6.2 if sound quality matters more than the price.
Looking for alternatives? See the complete Passive Home rankings.
Specifications Side By Side
| Ascend Acoustics Sierra-2EX V2 | Radiant Acoustics Clarity 6.2 | |
|---|---|---|
| Price | $1,748 per pair | $4500 per pair |
| Ranked | #38 of 130 in Large Size Bookshelf Speakers | #27 of 130 in Large Size Bookshelf Speakers |
| Enclosure | ported | - |
| Drivers | RAAL 10mm true ribbon tweeter, 6" SEAS Excel Curv cone woofer | 6.5" PURIFI USHINDI woofer, Custom AMT (Air Motion Transformer) tweeter |
| Dimensions | 14.3"H x 7.5"W x 10.5"D (362 x 190 x 267 mm) | 14.3"H x 8.7"W x 10.5"D (363.2 x 221 x 266.7 mm) |
| Weight | 20.1 lbs (9.1 kg) each | 23.8 lbs (10.8 kg) each |
| Sensitivity | 85dB @ 2.83V/1m anechoic (manufacturer) | 84.3dB (measured, Erin's Audio Corner) |
| Impedance | 8 ohms nominal | 4 ohms nominal (2.1 ohms minimum above 80Hz, measured, Erin's Audio Corner) |
| Power Handling | 150W continuous, 300W peak | - |
| Frequency Response | 51-27,000Hz +/-3dB (manufacturer) | - |
| Bass Extension (-6dB) | 51.3Hz (measured, spinorama.org vendor data) | - |
| Bass Extension (-3dB) | 58.6Hz (measured, spinorama.org vendor data) | 55Hz (measured, Erin's Audio Corner) |
| Bass Extension (-10dB) | 42.4Hz (measured, spinorama.org vendor data) | 32Hz (measured, Erin's Audio Corner) |
| Warranty | 7 years parts and labor | - |
| Country | United States | - |
| Spinorama Preference Score | 5.14 | 5.13 |
| Spinorama Preference Score with Perfect Sub | 7.22 | 6.90 |
| Woofer Cabinet | - | passive radiator |
Related Speaker Comparisons
More top alternatives to Radiant Acoustics Clarity 6.2:
- Radiant Acoustics Clarity 6.2 vs Perlisten S4b
- KEF Reference 1 Meta vs Radiant Acoustics Clarity 6.2
- Radiant Acoustics Clarity 6.2 vs GR-Research NX-Studio
- AsciLab C6B vs Radiant Acoustics Clarity 6.2
- Audio First Cadentia 3 vs Radiant Acoustics Clarity 6.2
Prices on this page were last checked September 16, 2026 at 12:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Ascend Acoustics Sierra-2EX V2: $1,748 per pair Ascend Acoustics eBay
Pros: A RAAL true ribbon tweeter is paired with a custom SEAS Excel Curv woofer, with the crossover optimized against Klippel NFS measurement data. Listening window smoothness measures 0.45, a moderate but usable figure for a compact standmount. Pairs are hand matched within +/-1.5dB and shipped with their own individual frequency response printout, backed by a 7 year parts and labor warranty from direct USA assembly in Orange County, California. Measured bass extension of 58.6Hz (-3dB).
Cons: On axis deviation (measured average absolute deviation 0.454) is the roughest of any speaker in this batch, meaning a listener sitting dead center may notice more on axis unevenness than the smoother AsciLab or Ascend tower models nearby. Bass extension is modest for the price class at a measured 51.3Hz at -6dB. Ascend sells direct only, with no dealer network or third party retailers for an in person audition.
Full Ascend Acoustics Sierra-2EX V2 review and specifications →
| Bass Extension (-10dB) | 42.4Hz (measured, spinorama.org vendor data) |
|---|---|
| Bass Extension (-3dB) | 58.6Hz (measured, spinorama.org vendor data) |
| Bass Extension (-6dB) | 51.3Hz (measured, spinorama.org vendor data) |
| Country | United States |
| Dimensions | 14.3"H x 7.5"W x 10.5"D (362 x 190 x 267 mm) |
| Drivers | RAAL 10mm true ribbon tweeter, 6" SEAS Excel Curv cone woofer |
| Enclosure | ported |
| Frequency Response | 51-27,000Hz +/-3dB (manufacturer) |
| Impedance | 8 ohms nominal |
| Power Handling | 150W continuous, 300W peak |
| Sensitivity | 85dB @ 2.83V/1m anechoic (manufacturer) |
| Spinorama Preference Score | 5.14 |
| Spinorama Preference Score with Perfect Sub | 7.22 |
| Warranty | 7 years parts and labor |
| Weight | 20.1 lbs (9.1 kg) each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Ascend Acoustics Sierra-2EX V2 vs Selah Audio Integrity
- Ascend Acoustics Sierra-2EX V2 vs Emotiva Airmotiv XB2
- Ascend Acoustics Sierra-2EX V2 vs Philharmonic BMR (v1)
- Ascend Acoustics Sierra-2EX V2 vs ELAC Debut 3.0 DB63
- Ascend Acoustics Sierra-2EX V2 vs Ascend Acoustics Sierra-LX
- Ascend Acoustics Sierra-2EX V2 vs Perlisten A3m
- Ascend Acoustics Sierra-2EX V2 vs Wharfedale Linton 85
- Ascend Acoustics Sierra-2EX V2 vs Aalto Speakers Aalto 3 Passive
- See all 45 comparisons
Radiant Acoustics Clarity 6.2: $4500 per pair Radiantacoustics eBay
Pros: Custom AMT (Air Motion Transformer) tweeter paired with a 6.5” Purifi Eikona midrange and dual Purifi passive radiators in a passive-radiator enclosure, crossed over at 2.4kHz. Rigid cabinet construction (21mm MDF with a 15mm aluminum front baffle, extensive internal bracing) helps keep resonance in check. A deliberately rising on-axis response paired with narrowing directivity above about 2kHz yields a genuinely linear, non-fatiguing in-room sound rather than the “fake detail” of speakers with a straight treble boost. Excellent pair matching between units (within about 1dB), contributing to precise, well-focused imaging that clearly separated fine details in test tracks. In-room bass extension reaches a solid 40Hz with real kick-drum authority, not just sub-bass rumble. Class-leading dynamic range and compression performance - among the best the reviewer has measured at this price point. Measured bass extension of 55Hz (-3dB), with a measured sensitivity of 84.3dB.
Cons: Needs a fairly specific setup to sound its best: about 15-20° of toe-out (per the manufacturer’s own recommendation) and roughly 2 feet from the rear wall; pointed straight on-axis, the treble reads as noticeably elevated. Low impedance (2.1-ohm minimum, about 1-ohm minimum EPDR) demands an amplifier genuinely comfortable with 4-ohm-and-below loads. Soundstage width narrows above about 5kHz, even though the AMT tweeter itself is capable of wider dispersion. An unexplained resonance appears in harmonic distortion measurements on both units tested (though not on the reviewer’s reference speaker) - possibly a basket resonance, and not something the reviewer could hear. A minor bump around 500Hz in the estimated in-room response could add a touch of boxiness for some listeners, though the reviewer didn’t personally notice it. F3 of 55Hz and F10 of 32Hz mean a subwoofer is still needed for home-theater rumble or bass-heavy genres like rap.
Full Radiant Acoustics Clarity 6.2 review and specifications →
| Bass Extension (-10dB) | 32Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 55Hz (measured, Erin's Audio Corner) |
| Dimensions | 14.3"H x 8.7"W x 10.5"D (363.2 x 221 x 266.7 mm) |
| Drivers | 6.5" PURIFI USHINDI woofer, Custom AMT (Air Motion Transformer) tweeter |
| Impedance | 4 ohms nominal (2.1 ohms minimum above 80Hz, measured, Erin's Audio Corner) |
| Sensitivity | 84.3dB (measured, Erin's Audio Corner) |
| Spinorama Preference Score | 5.13 |
| Spinorama Preference Score with Perfect Sub | 6.90 |
| Weight | 23.8 lbs (10.8 kg) each |
| Woofer Cabinet | passive radiator |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Radiant Acoustics Clarity 6.2 vs MoFi SourcePoint 10
- Radiant Acoustics Clarity 6.2 vs Dynaudio Heritage Special
- Radiant Acoustics Clarity 6.2 vs Wharfedale Super Linton
- Radiant Acoustics Clarity 6.2 vs Ascend Acoustics CMT-340 SE2
- Radiant Acoustics Clarity 6.2 vs Wharfedale Linton 85
- Radiant Acoustics Clarity 6.2 vs Arendal 1528 Monitor 8
- Radiant Acoustics Clarity 6.2 vs Ascend Acoustics Sierra-LX
- Radiant Acoustics Clarity 6.2 vs Revel M126Be
- See all 45 comparisons