Short answer: the ELAC Uni-Fi 2.0 UB52 ranks #52 of 71 bookshelf speakers by sound quality at $599; the Wharfedale Diamond 12.1 ranks #20 at $599. Close enough in price that the sound-quality gap is the deciding factor.
What the ELAC Uni-Fi 2.0 UB52 offers: Wide, smooth horizontal directivity - beamwidth holds to about ±60 degrees up to 8kHz before narrowing. Vertical directivity is substantially better than average, giving more listening-height leeway than most two-way bookshelf speakers. Watch for: Dipped 3db from 1.5-3khz. On-axis response shelves down above 1.5kHz along with multiple resonances, leading the reviewer to predict it will “likely sound dull.” Nasty resonance at 600hz - audible as an actual buzzing artifact on some recordings (the reviewer demonstrated it with an Eva Cassidy track), and it shows up as a sharp distortion spike exceeding 4% at 585Hz when driven to 96dB SPL/1m. Not recommended.
What the Wharfedale Diamond 12.1 offers: A budget two-way bookshelf speaker (5” polypropylene woofer, 1” textile dome tweeter) that measures well for its price: harmonic distortion at 86dB stays under 1% THD down to about 60Hz, genuinely good for a 5” mid-woofer. Wide horizontal radiation of about ±60° up to roughly 5kHz before the tweeter starts to beam. Tonally smooth and easy to listen to at moderate volumes, with a pleasant, non-fatiguing character the reviewer said he’d happily recommend to someone who wants noticeably better fit, finish and looks than typical speakers in the $300-400 range. A high-pass crossover around 80Hz meaningfully cleans up midrange multitone distortion, so pairing it with a subwoofer helps more than usual for a speaker this size. Watch for: A dip of about 3dB in the 1-3kHz crossover region (on-axis, in the predicted in-room response, and even off-axis) gives the speaker a soft, “laid-back” character that noticeably saps attack and transient bite from drums, guitar and other percussive material - possibly an intentional BBC-style dip, but one the reviewer would still prefer tuned flat. Vertical directivity is unusually tight for this class of speaker, holding together only within about ±5° of the tweeter axis before a real hole opens up in the response, so seating height matters a lot more than on most bookshelf designs. Diffraction artifacts around 3kHz and 5kHz show up as differences between the listening-window and on-axis curves. Distortion climbs well past acceptable levels at higher output - harmonic distortion exceeds 3% around 150Hz at 96dB (versus under 1% at 86dB), multitone distortion tops 10% at 96dB/1m, and real compression sets in between 96-102dB (about 1.5dB of lost dynamic range around 300Hz at 102dB/1m, roughly equivalent to 92dB for a pair at 4m in a room) - a genuine limitation on how loud or how far away this speaker can be pushed. Measured average sensitivity (84dB) runs a few dB below the 87dB spec. Only a 5” woofer, so a subwoofer is required for real bass.
Buy the Wharfedale Diamond 12.1. It ranks higher for sound quality than the ELAC Uni-Fi 2.0 UB52 at the same price, so there is no real case for the other one.
Specifications Side By Side
| ELAC Uni-Fi 2.0 UB52 | Wharfedale Diamond 12.1 | |
|---|---|---|
| Price | $599.00 | $599 Discontinued |
| Ranked | #52 of 71 in Medium Size Bookshelf Speakers | #20 of 71 in Medium Size Bookshelf Speakers |
| Crossover Frequency | 200Hz / 2000Hz | 2.6kHz |
| Dimensions | 13.6"H x 7.3"W x 10.8"D (346 x 185 x 275 mm) | 12.2"H x 7"W x 10.9"D (310 x 178 x 277 mm) |
| Impedance | 6 ohms | 8 ohms nominal (3.9 ohms minimum above 80Hz, measured, Erin’s Audio Corner) |
| Sensitivity | 83.3dB (measured by Audio Science Review; 85dB manufacturer specified) | 84dB (measured by Erin’s Audio Corner; 87dB manufacturer specified) |
| Drivers | 5.25" aluminum woofer, 4" aluminum midrange, 1" soft dome tweeter | 5" advanced polypropylene cone woofer, 1" textile dome tweeter |
| Power Handling | 140W max | - |
| Woofer Cabinet | ported | ported |
| Weight | 7.7 lbs / 3.5 kg | 15 lbs / 6.8 kg each |
| Bass Extension (-3dB) | 55.7Hz (measured, Audio Science Review) | 61Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-10dB) | 38.6Hz (measured, Audio Science Review) | 46Hz (measured, Erin’s Audio Corner) |
| Discontinued | - | Yes |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- ELAC BS U5 vs JBL Stage A120
- KEF Q100 vs Pioneer Elite SP-EBS73-LR
- Dynaudio Emit M10 vs JBL Stage A120
- Audio First Fidelia vs Wharfedale Diamond 12.1
- Wharfedale Diamond 12.1 vs KEF Q100
Prices on this page were last checked August 24, 2026 at 6:53 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
ELAC Uni-Fi 2.0 UB52: $599.00 Amazon eBay
Pros: Wide, smooth horizontal directivity - beamwidth holds to about ±60 degrees up to 8kHz before narrowing. Vertical directivity is substantially better than average, giving more listening-height leeway than most two-way bookshelf speakers.
Cons: Dipped 3db from 1.5-3khz. On-axis response shelves down above 1.5kHz along with multiple resonances, leading the reviewer to predict it will “likely sound dull.” Nasty resonance at 600hz - audible as an actual buzzing artifact on some recordings (the reviewer demonstrated it with an Eva Cassidy track), and it shows up as a sharp distortion spike exceeding 4% at 585Hz when driven to 96dB SPL/1m. Not recommended.
Full ELAC Uni-Fi 2.0 UB52 review and specifications →
| Bass Extension (-10dB) | 38.6Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 55.7Hz (measured, Audio Science Review) |
| Crossover Frequency | 200Hz / 2000Hz |
| Dimensions | 13.6"H x 7.3"W x 10.8"D (346 x 185 x 275 mm) |
| Drivers | 5.25" aluminum woofer, 4" aluminum midrange, 1" soft dome tweeter |
| Impedance | 6 ohms |
| Power Handling | 140W max |
| Sensitivity | 83.3dB (measured by Audio Science Review; 85dB manufacturer specified) |
| Weight | 7.7 lbs / 3.5 kg |
| Woofer Cabinet | ported |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- ELAC Uni-Fi 2.0 UB52 vs KEF Q100
- ELAC Uni-Fi 2.0 UB52 vs JBL Stage A120
- ELAC Uni-Fi 2.0 UB52 vs Q Acoustics 3020i
- ELAC Uni-Fi 2.0 UB52 vs JBL L52 Classic
- ELAC Uni-Fi 2.0 UB52 vs Pioneer SP-BS22-LR (Philharmonic AAM Mod)
- ELAC Uni-Fi 2.0 UB52 vs Micca RB42
- ELAC Uni-Fi 2.0 UB52 vs Q Acoustics 5020
- ELAC Uni-Fi 2.0 UB52 vs Dynaudio X14
- See all 33 comparisons
Wharfedale Diamond 12.1: $599 Discontinued eBay
Pros: A budget two-way bookshelf speaker (5” polypropylene woofer, 1” textile dome tweeter) that measures well for its price: harmonic distortion at 86dB stays under 1% THD down to about 60Hz, genuinely good for a 5” mid-woofer. Wide horizontal radiation of about ±60° up to roughly 5kHz before the tweeter starts to beam. Tonally smooth and easy to listen to at moderate volumes, with a pleasant, non-fatiguing character the reviewer said he’d happily recommend to someone who wants noticeably better fit, finish and looks than typical speakers in the $300-400 range. A high-pass crossover around 80Hz meaningfully cleans up midrange multitone distortion, so pairing it with a subwoofer helps more than usual for a speaker this size.
Cons: A dip of about 3dB in the 1-3kHz crossover region (on-axis, in the predicted in-room response, and even off-axis) gives the speaker a soft, “laid-back” character that noticeably saps attack and transient bite from drums, guitar and other percussive material - possibly an intentional BBC-style dip, but one the reviewer would still prefer tuned flat. Vertical directivity is unusually tight for this class of speaker, holding together only within about ±5° of the tweeter axis before a real hole opens up in the response, so seating height matters a lot more than on most bookshelf designs. Diffraction artifacts around 3kHz and 5kHz show up as differences between the listening-window and on-axis curves. Distortion climbs well past acceptable levels at higher output - harmonic distortion exceeds 3% around 150Hz at 96dB (versus under 1% at 86dB), multitone distortion tops 10% at 96dB/1m, and real compression sets in between 96-102dB (about 1.5dB of lost dynamic range around 300Hz at 102dB/1m, roughly equivalent to 92dB for a pair at 4m in a room) - a genuine limitation on how loud or how far away this speaker can be pushed. Measured average sensitivity (84dB) runs a few dB below the 87dB spec. Only a 5” woofer, so a subwoofer is required for real bass. Discontinued.
Full Wharfedale Diamond 12.1 review and specifications →
| Bass Extension (-10dB) | 46Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 61Hz (measured, Erin's Audio Corner) |
| Crossover Frequency | 2.6kHz |
| Dimensions | 12.2"H x 7"W x 10.9"D (310 x 178 x 277 mm) |
| Discontinued | Yes |
| Drivers | 5" advanced polypropylene cone woofer, 1" textile dome tweeter |
| Impedance | 8 ohms nominal (3.9 ohms minimum above 80Hz, measured, Erin's Audio Corner) |
| Sensitivity | 84dB (measured by Erin's Audio Corner; 87dB manufacturer specified) |
| Weight | 15 lbs / 6.8 kg each |
| Woofer Cabinet | ported |
- Links
- Reviews, Comparisons and Sound Samples
- Erin’s Audio Corner: Wharfedale 12.1 Budget Bookshelf Speaker with “Laid Back” sound but output limited. More from Erin’s Audio Corner →
- Audio Science Review Wharfedale Diamond 12.1 More from Audio Science Review →
- Erin’s Audio Corner Website: Wharfedale Diamond 12.1
- Audio Science Review Measurements (spinorama.org)
- Reddit Search for Wharfedale Diamond 12.1 Review
- Head-to-Head Comparisons
- Wharfedale Diamond 12.1 vs Carmody S2000
- Wharfedale Diamond 12.1 vs Radiant Acoustics Clarity 4.2
- Wharfedale Diamond 12.1 vs Wharfedale Super Denton
- Wharfedale Diamond 12.1 vs Klipsch RP-500M II
- Wharfedale Diamond 12.1 vs KEF Q150
- Wharfedale Diamond 12.1 vs Wharfedale Diamond 220
- Wharfedale Diamond 12.1 vs Monitor Audio Silver 50 7G
- Wharfedale Diamond 12.1 vs Revel M105
- See all 29 comparisons