Short answer: the Radiant Acoustics Clarity 4.2 for better sound quality, the ELAC Debut 2.0 B5.2 for the lower price. The Radiant Acoustics Clarity 4.2 ranks #23 of 87 bookshelf speakers at $2998. The ELAC Debut 2.0 B5.2 ranks #47 at $329, $2669 cheaper.
What the ELAC Debut 2.0 B5.2 offers: Good horizontal directivity: the off-axis curves track the on-axis response closely, so the broad tonal error responds predictably to EQ. Erin demonstrated that a single high-shelf filter centered near 1.6kHz, about -2dB with Q near 2, substantially improves linearity. Moderate roughly +/-50-60 degree horizontal coverage balances room interaction and image focus. The front port makes close-to-wall placement practical. Erin measured F3 near 60Hz and F10 near 40Hz, useful extension for a compact 5.25-inch two-way. Harmonic distortion is mostly below 1% at 86dB/1m, and low-frequency distortion is better than its size might suggest. Compact cabinet and inexpensive pair pricing make it a workable EQ-assisted desktop or small-room system. Watch for: Erin measured a broad +3dB step beginning around 1.5kHz; the resulting elevated upper range sounds tonally uneven even though it is not a narrow, sharp resonance. Native response spans roughly -2.6 to +4dB around the mean, so this is not a neutral speaker without correction. Sensitivity is only about 83dB after correcting the shelf, demanding materially more amplifier voltage than ELAC’s 86dB specification implies. Vertical response changes substantially outside roughly +/-10 degrees of tweeter height. Dynamic compression is the larger limitation: at the highest sweep level it loses roughly 1-1.5dB through the midrange, and even the 86dB trace shows unusual nonlinearity that may involve crossover heating. At about 96dB, multitone distortion rises audibly around 600Hz; an 80-120Hz subwoofer crossover helps but does not turn it into a high-output design. Erin recommends the larger B6.2 instead when EQ is unavailable.
What the Radiant Acoustics Clarity 4.2 offers: Compact bookshelf design using a 4” Purifi mid-woofer with matching Purifi passive radiators and an AMT tweeter on a purpose-designed waveguide, built with genuine heft - aluminum baffle, extensive internal bracing and damping. Surprisingly wide horizontal dispersion (about ±70° through the midrange and into the treble), more enveloping than its larger 6.2 sibling despite the smaller cabinet. More linear on-axis than the bigger Clarity 6.2, which needs 15-20° of toe-out to tame a rising treble; the 4.2 can be listened to closer to on-axis without that same correction. Wider-than-typical vertical dispersion (roughly +30°/-20°) for a two-way design, since its smaller woofer keeps the tweeter-to-woofer distance short. Genuinely deep bass extension for its size (F3 44Hz, reaching about 40Hz in-room), though it comes at a real cost to sensitivity. No resonance issues visible in impedance measurements. Watch for: Low sensitivity (rated 78dB, measured 78.5dB) is the trade-off for its bass extension - needs a fair amount of amplifier power, around 100W recommended for small-to-medium rooms versus the manufacturer’s own 60W baseline. Designed specifically for smaller rooms; the reviewer had to move testing out of his open-plan living room and into a smaller bedroom to avoid running into compression. A dip in the upper midrange gives a mild lack of attack and clarity, and a peak around 5kHz occasionally added a touch of extra sibilance. Multitone distortion crosses the reviewer’s 3% threshold at 96dB, making about 88dB a better average listening level; a slight upper-midrange bump persists even with an 80Hz high-pass filter applied. Dynamic range is limited: fine at 86dB, but the woofer starts giving up headroom by 96dB and drops off significantly by 102dB. Compared to its pricier sibling Clarity 6.2, has notably less dynamic range and higher multitone distortion, reflecting the smaller driver complement. A niche product size-wise - the reviewer couldn’t identify a clear direct competitor in the same size/price/SPL class.
Buy the ELAC Debut 2.0 B5.2 if the price matters more than sound quality. Buy the Radiant Acoustics Clarity 4.2 if sound quality matters more than the price.
Specifications Side By Side
| ELAC Debut 2.0 B5.2 | Radiant Acoustics Clarity 4.2 | |
|---|---|---|
| Price | $329.00 | $2,998 |
| Ranked | #47 of 87 in Medium Size Bookshelf Speakers | #23 of 87 in Medium Size Bookshelf Speakers |
| Bass Extension (-10dB) | 40Hz (measured, Erin’s Audio Corner) | 35 Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | 60Hz (measured, Erin’s Audio Corner) | 44 Hz (measured, Erin’s Audio Corner) |
| Dimensions | 13.4"H x 7.1"W x 9.2"D (341 x 180 x 234 mm) | 9.5"H x 6.3"W x 9.4"D (241 x 160 x 239 mm) |
| Impedance | 6 ohms nominal (manufacturer specified) | 4 ohms |
| Sensitivity | About 83dB after recommended EQ (measured, Erin’s Audio Corner; 86dB manufacturer specified) | 78 dB |
| Drivers | 5.25" aramid-fiber woofer, 1" cloth-dome tweeter | (2) 4" (102mm) woofer + AMT tweeter |
| Weight | 13 lbs / 5.9 kg each | 28.7 lbs / 13 kg (per pair: 57.3 lbs / 26 kg) |
| Woofer Cabinet | ported, front | passive radiator |
| Frequency Response | - | 40 Hz - 25 kHz |
| Woofer | - | 4" (102mm) PURIFI USHINDI |
| Tweeter | - | AMT (Air Motion Transformer) |
| Amplifier Required | - | Yes |
| Recommended Power | - | 50-200W |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- KEF LS50 Meta vs Tekton Troubadour
- Arendal 1961 Monitor vs Tekton Troubadour
- Ascend Sierra 1 v2 vs Tekton Troubadour
- Q Acoustics 3020i vs Radiant Acoustics Clarity 4.2
- KEF Q150 vs Radiant Acoustics Clarity 4.2
Prices on this page were last checked August 25, 2026 at 6:19 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
ELAC Debut 2.0 B5.2: $329.00 Amazon eBay
Pros: Good horizontal directivity: the off-axis curves track the on-axis response closely, so the broad tonal error responds predictably to EQ. Erin demonstrated that a single high-shelf filter centered near 1.6kHz, about -2dB with Q near 2, substantially improves linearity. Moderate roughly +/-50-60 degree horizontal coverage balances room interaction and image focus. The front port makes close-to-wall placement practical. Erin measured F3 near 60Hz and F10 near 40Hz, useful extension for a compact 5.25-inch two-way. Harmonic distortion is mostly below 1% at 86dB/1m, and low-frequency distortion is better than its size might suggest. Compact cabinet and inexpensive pair pricing make it a workable EQ-assisted desktop or small-room system.
Cons: Erin measured a broad +3dB step beginning around 1.5kHz; the resulting elevated upper range sounds tonally uneven even though it is not a narrow, sharp resonance. Native response spans roughly -2.6 to +4dB around the mean, so this is not a neutral speaker without correction. Sensitivity is only about 83dB after correcting the shelf, demanding materially more amplifier voltage than ELAC’s 86dB specification implies. Vertical response changes substantially outside roughly +/-10 degrees of tweeter height. Dynamic compression is the larger limitation: at the highest sweep level it loses roughly 1-1.5dB through the midrange, and even the 86dB trace shows unusual nonlinearity that may involve crossover heating. At about 96dB, multitone distortion rises audibly around 600Hz; an 80-120Hz subwoofer crossover helps but does not turn it into a high-output design. Erin recommends the larger B6.2 instead when EQ is unavailable.
Full ELAC Debut 2.0 B5.2 review and specifications →
| Bass Extension (-10dB) | 40Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 60Hz (measured, Erin's Audio Corner) |
| Dimensions | 13.4"H x 7.1"W x 9.2"D (341 x 180 x 234 mm) |
| Drivers | 5.25" aramid-fiber woofer, 1" cloth-dome tweeter |
| Impedance | 6 ohms nominal (manufacturer specified) |
| Sensitivity | About 83dB after recommended EQ (measured, Erin's Audio Corner; 86dB manufacturer specified) |
| Weight | 13 lbs / 5.9 kg each |
| Woofer Cabinet | ported, front |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- ELAC Debut 2.0 B5.2 vs Sony SS-CS5 M2
- ELAC Debut 2.0 B5.2 vs Paradigm Monitor SE Atom
- ELAC Debut 2.0 B5.2 vs JBL Studio 530
- ELAC Debut 2.0 B5.2 vs Dynaudio Emit M10
- ELAC Debut 2.0 B5.2 vs ELAC BS U5
- ELAC Debut 2.0 B5.2 vs JBL Stage 2 250B
- ELAC Debut 2.0 B5.2 vs Boston Acoustics A25
- ELAC Debut 2.0 B5.2 vs Dynaudio X14
- See all 33 comparisons
Radiant Acoustics Clarity 4.2: $2,998 Radiant Acoustics eBay
Pros: Compact bookshelf design using a 4” Purifi mid-woofer with matching Purifi passive radiators and an AMT tweeter on a purpose-designed waveguide, built with genuine heft - aluminum baffle, extensive internal bracing and damping. Surprisingly wide horizontal dispersion (about ±70° through the midrange and into the treble), more enveloping than its larger 6.2 sibling despite the smaller cabinet. More linear on-axis than the bigger Clarity 6.2, which needs 15-20° of toe-out to tame a rising treble; the 4.2 can be listened to closer to on-axis without that same correction. Wider-than-typical vertical dispersion (roughly +30°/-20°) for a two-way design, since its smaller woofer keeps the tweeter-to-woofer distance short. Genuinely deep bass extension for its size (F3 44Hz, reaching about 40Hz in-room), though it comes at a real cost to sensitivity. No resonance issues visible in impedance measurements.
Cons: Low sensitivity (rated 78dB, measured 78.5dB) is the trade-off for its bass extension - needs a fair amount of amplifier power, around 100W recommended for small-to-medium rooms versus the manufacturer’s own 60W baseline. Designed specifically for smaller rooms; the reviewer had to move testing out of his open-plan living room and into a smaller bedroom to avoid running into compression. A dip in the upper midrange gives a mild lack of attack and clarity, and a peak around 5kHz occasionally added a touch of extra sibilance. Multitone distortion crosses the reviewer’s 3% threshold at 96dB, making about 88dB a better average listening level; a slight upper-midrange bump persists even with an 80Hz high-pass filter applied. Dynamic range is limited: fine at 86dB, but the woofer starts giving up headroom by 96dB and drops off significantly by 102dB. Compared to its pricier sibling Clarity 6.2, has notably less dynamic range and higher multitone distortion, reflecting the smaller driver complement. A niche product size-wise - the reviewer couldn’t identify a clear direct competitor in the same size/price/SPL class.
Full Radiant Acoustics Clarity 4.2 review and specifications →
| Amplifier Required | Yes |
|---|---|
| Bass Extension (-10dB) | 35 Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 44 Hz (measured, Erin's Audio Corner) |
| Dimensions | 9.5"H x 6.3"W x 9.4"D (241 x 160 x 239 mm) |
| Drivers | (2) 4" (102mm) woofer + AMT tweeter |
| Frequency Response | 40 Hz - 25 kHz |
| Impedance | 4 ohms |
| Recommended Power | 50-200W |
| Sensitivity | 78 dB |
| Tweeter | AMT (Air Motion Transformer) |
| Weight | 28.7 lbs / 13 kg (per pair: 57.3 lbs / 26 kg) |
| Woofer | 4" (102mm) PURIFI USHINDI |
| Woofer Cabinet | passive radiator |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Radiant Acoustics Clarity 4.2 vs Wharfedale Diamond 12.1
- Radiant Acoustics Clarity 4.2 vs KEF Q150
- Radiant Acoustics Clarity 4.2 vs Wharfedale Super Denton
- Radiant Acoustics Clarity 4.2 vs Klipsch RP-500M II
- Radiant Acoustics Clarity 4.2 vs Moondrop M4P MTM
- Radiant Acoustics Clarity 4.2 vs Arendal 1961 Monitor
- Radiant Acoustics Clarity 4.2 vs KEF LS50 Meta
- Radiant Acoustics Clarity 4.2 vs Ascend Sierra 1 v2
- See all 22 comparisons