ELAC Debut 2.0 B5.2 Specifications and Review

Last updated: September 8, 2026

The ELAC Debut 2.0 B5.2 ranks #47 out of 87 total Medium Size Bookshelf Speakers for sound quality. See Top Recommended Speakers By Attribute for all the top speaker suggestions.

Brand: ELAC

Prices on this page were last checked September 8, 2026 at 6:02 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

ELAC Debut 2.0 B5.2 - ranked #47 of 87 Medium Size Bookshelf Speakers · Editor's rating 3.2/5
Check price at Amazon ($329.00) →

#47 ELAC Debut 2.0 B5.2: $329.00 Amazon eBay

Pros: Good horizontal directivity: the off-axis curves track the on-axis response closely, so the broad tonal error responds predictably to EQ. Erin demonstrated that a single high-shelf filter centered near 1.6kHz, about -2dB with Q near 2, substantially improves linearity. Moderate roughly +/-50-60 degree horizontal coverage balances room interaction and image focus. The front port makes close-to-wall placement practical. Erin measured F3 near 60Hz and F10 near 40Hz, useful extension for a compact 5.25-inch two-way. Harmonic distortion is mostly below 1% at 86dB/1m, and low-frequency distortion is better than its size might suggest. Compact cabinet and inexpensive pair pricing make it a workable EQ-assisted desktop or small-room system.

Cons: Erin measured a broad +3dB step beginning around 1.5kHz; the resulting elevated upper range sounds tonally uneven even though it is not a narrow, sharp resonance. Native response spans roughly -2.6 to +4dB around the mean, so this is not a neutral speaker without correction. Sensitivity is only about 83dB after correcting the shelf, demanding materially more amplifier voltage than ELAC’s 86dB specification implies. Vertical response changes substantially outside roughly +/-10 degrees of tweeter height. Dynamic compression is the larger limitation: at the highest sweep level it loses roughly 1-1.5dB through the midrange, and even the 86dB trace shows unusual nonlinearity that may involve crossover heating. At about 96dB, multitone distortion rises audibly around 600Hz; an 80-120Hz subwoofer crossover helps but does not turn it into a high-output design. Erin recommends the larger B6.2 instead when EQ is unavailable.

How it compares: Just above it: PSB Alpha P3 - $120 more, 2Hz higher bass extension (-3dB). Just below it: Sony SS-CS5 M2 - $131 cheaper, 0.5Hz lower bass extension (-3dB).

Bass Extension (-10dB)40Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)60Hz (measured, Erin's Audio Corner)
Dimensions13.4"H x 7.1"W x 9.2"D (341 x 180 x 234 mm)
Drivers5.25" aramid-fiber woofer, 1" cloth-dome tweeter
Impedance6 ohms nominal (manufacturer specified)
SensitivityAbout 83dB after recommended EQ (measured, Erin's Audio Corner; 86dB manufacturer specified)
Weight13 lbs / 5.9 kg each
Woofer Cabinetported, front
Check current price at Amazon ($329.00) →Search eBay for ELAC Debut 2.0 B5.2 →

More ELAC speakers →