Dynaudio Emit M10 vs JBL Stage 2 250B

Short answer: the Dynaudio Emit M10 for better sound quality, the JBL Stage 2 250B for the lower price. The Dynaudio Emit M10 ranks #28 of 56 bookshelf speakers at $800. The JBL Stage 2 250B ranks #30 at $349.95, $450.05 cheaper.

What the Dynaudio Emit M10 gets right: CEA2034 spinorama shows impressive, headphone-level distortion through the midrange and tweeter at 86dB SPL, with a well-executed port that keeps resonance low below the crossover. The catch: Tuned toward a mild showroom sound with boosted upper bass and treble and a recessed midrange - the reviewer prefers speakers that get the 100Hz-3kHz range right, which this doesn’t.

What the JBL Stage 2 250B offers: Consistent, EQ-able dips in the frequency response mean the tonal issues are at least correctable if you’re willing to use equalization. Watch for: The reviewer was “even less enthusiastic” about this one than its disappointing floorstanding sibling.

Buy the Dynaudio Emit M10 if sound quality matters more than the price. Buy the JBL Stage 2 250B if the price matters more than sound quality.

Specifications Side By Side

Related Speaker Comparisons

More useful head-to-heads from the same speaker class:

• ELAC BS U5 vs JBL Stage A120
• Boston Acoustics A25 vs ELAC BS U5
• Sony SS-CS5 M2 vs ELAC BS U5
• KEF Q150 vs Dynaudio Emit M10
• Wharfedale Diamond 220 vs Dynaudio Emit M10

The Two Speakers In Full

Dynaudio Emit M10: $800

Pros: CEA2034 spinorama shows impressive, headphone-level distortion through the midrange and tweeter at 86dB SPL, with a well-executed port that keeps resonance low below the crossover. 28mm soft dome tweeter and 14cm MSP mid/bass driver.

Cons: Tuned toward a mild showroom sound with boosted upper bass and treble and a recessed midrange - the reviewer prefers speakers that get the 100Hz-3kHz range right, which this doesn’t. His verdict: cheaper speakers deliver much more balanced tonality, so he wouldn’t buy it for himself.

Full Dynaudio Emit M10 review and specifications →

Bass Extension (-10dB)	60Hz (measured, Audio Science Review)
Bass Extension (-3dB)	78Hz (measured, Audio Science Review)
Dimensions	11.5"H x 6.7"W x 9.4"D (292 x 170 x 240 mm)
Drivers	28mm soft dome tweeter, 14cm MSP mid/bass driver
Frequency Response	50Hz - 23kHz (+/-3dB) (Manufacturer specified)
Impedance	6 ohms nominal
Sensitivity	83.5dB (2.83V/1m, measured, Audio Science Review)
Weight	12.3 lbs / 5.6 kg each
Woofer Cabinet	ported

As an eBay Partner, we may be compensated if you make a purchase.

• Links
  • Official Dynaudio Emit M10 Product Page
• Reviews, Comparisons and Sound Samples
  • Audio Science Review Measurements
  • Reddit Search for Dynaudio Emit M10 Review
• Head-to-Head Comparisons
  • Dynaudio Emit M10 vs ELAC BS U5
  • Dynaudio Emit M10 vs Paradigm Monitor SE Atom
  • Dynaudio Emit M10 vs Sony SS-CS5 M2
  • Dynaudio Emit M10 vs Dynaudio X14
  • Dynaudio Emit M10 vs ELAC Debut 2.0 B5.2
  • Dynaudio Emit M10 vs JBL Studio 530
  • Dynaudio Emit M10 vs Pioneer SP-BS22-LR (Philharmonic AAM Mod)
  • Dynaudio Emit M10 vs JBL L52 Classic
  • See all 17 comparisons

JBL Stage 2 250B: $349.95 Amazon

Pros: Consistent, EQ-able dips in the frequency response mean the tonal issues are at least correctable if you’re willing to use equalization. Horizontal dispersion is reasonably wide and controlled (~50-60 degrees). The tweeter itself holds up fine under compression testing - it’s the midwoofer that gives out first.

Cons: The reviewer was “even less enthusiastic” about this one than its disappointing floorstanding sibling. A confusing, hard-to-place tonal signature - a lower-midrange dip creates a recessed, lacking-attack character that’s then partly offset by a rebound around 2-4kHz, so it reads as recessed and forward at different times depending on the material. Treble falls off sharply above 6-7kHz, same issue as the larger 280F. Multitone distortion at 96dB is genuinely poor - well over 3%, reportedly around 10% at some frequencies. Limited bass extension (F3 64Hz, F10 50Hz) means a subwoofer is basically required if used as main speakers. Compression sets in early on the bass/midwoofer at higher output. The reviewer explicitly recommends the similarly-priced Polk Reserve R200/R100 instead for anyone who wants a more linear, EQ-free sound.

Full JBL Stage 2 250B review and specifications →

Bass Extension (-10dB)	50Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)	64Hz (measured, Erin's Audio Corner)
Dimensions	12.6"H x 7.9"W x 9.5"D (321.0 x 200.0 x 241.0 mm)
Drivers	1" anodized aluminum dome tweeter with HDI waveguide, 5.25" polycellulose woofer
Impedance	6 ohms nominal, 3.3 ohms minimum (measured, Erin's Audio Corner)
Output Power	75W RMS
Sensitivity	86dB (2.83V/1m, measured by Erin's Audio Corner)
Weight	12.3 lbs / 5.6 kg (12.4 lb) per pair
Woofer Cabinet	ported, rear

As an eBay Partner, we may be compensated if you make a purchase.

• Links
  • Official JBL Stage 2 250B Product Page
• Reviews, Comparisons and Sound Samples
  • Erin’s Audio Corner: Why JBL’s New Budget “Stage 2” Speakers Miss the Mark For Me.
  • Erin’s Audio Corner Website: JBL Stage 2 250B
  • Reddit Search for JBL Stage 2 250B Review
• Head-to-Head Comparisons
  • JBL Stage 2 250B vs ELAC BS U5
  • JBL Stage 2 250B vs Dynaudio X14
  • JBL Stage 2 250B vs Pioneer SP-BS22-LR (Philharmonic AAM Mod)
  • JBL Stage 2 250B vs Paradigm Monitor SE Atom
  • JBL Stage 2 250B vs JBL L52 Classic
  • JBL Stage 2 250B vs Sony SS-CS5 M2
  • JBL Stage 2 250B vs ELAC Debut 2.0 B5.2
  • JBL Stage 2 250B vs JBL Stage A120
  • See all 18 comparisons